iPhone / iPad (iOS 26)

1. Open Safari
2. Go to our build a quote tool page
3. Tap More (•••) then tap Share (or tap the Share button if you see it)
4. Tap Add to Home Screen
5. Turn on Open as Web App
6. Tap Add

Can’t see “Add to Home Screen”? Scroll down → Edit Actions → tap the green + next to Add to Home Screen.

iPhone / iPad (older iOS, e.g., iOS 17/18)

1. Open Safari
2. Go to our build a quote tool page
3. Tap Share
4. Tap Add to Home Screen → Add

If it’s missing: Edit Actions → add Add to Home Screen.

Note: Using Chrome/Firefox on iPhone may not show the same “web app” options — Safari is the most reliable route.

Android (Google Chrome)

1. Open Chrome and go to our build a quote tool page
2. Tap ⋮ (top right)
3. Tap Add to home screen → Install
4. Confirm Install/Add

Use this tool if you:

• already know roughly what you need, or
• want a fast, itemised quote for a tender, or
• want to price a job instantly without waiting for a formal quotation.

Contact our sales/design team directly if you need:

• heat loss calculations
• system design layouts / drawings

help with unusual building types, complex zoning, or unknown site conditions

Quantities are estimated from the areas and selections you provide using built-in UFH rules. In summary:

• Boards/panels/rails include 15% wastage and are rounded up to whole packs.
• Pipe is calculated using the system’s spacing (typically 150mm or 200mm, depending on the system) and loop limits, then supplied in the most efficient coil sizes to minimise waste.
• Manifolds and controls are sized to suit the number of loops/zones across the project (e.g., actuators are 1 per loop).
• Pumpset type is selected based on your heat source (where applicable).
• Some items are added only when required by your selections (for example levelling compound/primer and adhesives) and are rounded up to full units.
• Single-room and multi-room projects are quoted differently to match best practice.
• If a boiler is selected, we assume 55°C flow / 45°C return.
• If an air source heat pump, we assume 45°C flow / 35°C return.
• Typical room build‑ups unless otherwise specified:
  • Habitable areas (timber/carpet): 0.15 m²K/W
  • Wet areas (tiled): 0.01 m²K/W

Actual requirements can vary due to room shape, obstacles, manifold location and site conditions - always review the basket before ordering.

When the configurator finishes, everything required is added to your basket. From there you can:

• adjust quantities up or down
• remove items if you’re sourcing something elsewhere
• add extras (tools, spares, accessories)
• checkout when you’re happy

To get the best result (and avoid re-doing steps), have these to hand:

• Room areas (m²) for each heated room/zone - enter the net heated area you want to cover.
• Number of floors and rooms/zones you want to control separately.
• Subfloor type per room (e.g., concrete, timber boarded, timber joists).
• Heat source (e.g., boiler, heat pump).
• Any known constraints: floor build-up limits, insulation already planned, target floor finishes, or anything unusual about the install.
• If available, plans/drawings (PDF/JPG/PNG) - you can upload these for the sales team to cross-check if you request a review.

Prices shown reflect your account type:

• Trade accounts see trade pricing when logged in
• Guests see standard website pricing
  All prices are exclusive of VAT.